At 04:28 PM 4/27/98 -0600, you wrote:
> From:Tim Roller >starwolf@bewellnet.com
>
> >Welcome to the "Dakota Zone" and congrats on your selection of a R/T.
>You'll have to take the DAK to the dealer and have him use a programmer to
>get a firmer shift. All DAK's made after '96 use a different computer module
>and require the dealer involvement, unless you know somebody who has a
>computer programming tool set up for Chrysler vehicles.
>
> Interesting, has anybody had this done?
Tony
>-----Original Message-----
>From: hayesdm@scott.net <hayesdm@scott.net>
>To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>Date: Monday, April 27, 1998 11:52 AM
>Subject: DML: Shift Kits for DAKS....
>
>
>Hello everyone, new to this list. I bought myself a 98 CC RT a few
>weeks ago and have been lurking in here reading the posts ever
>since.
>
>So far I LOVE the RT. Probably no faster than a 318 with a 5 speed,
>but I figured if I was going to start, I might as well start with the
>360!
>
>Anyway, my question is about improving the shift feel of the
>transmission? It's the HD 4 speed auto and the shifts are so soft
>ans sluggish (I came out of a 95 Z28 that shifted as tightly as most
>manuals) that I would love to firm it up a bit. I know there are
>kits for almost all GM trans, but am somewhat unfamilar with the
>newer Dodge transmissions.
>
>Any ideas?
>
>Thanks in advance,
>Donny M Hayes
>
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:39 EDT