Re: Cargo/Dome light switch revisited

From: David Brown (dbrown@mh1.mcis.uchicago.edu)
Date: Tue Apr 28 1998 - 13:03:14 EDT

I should have mentioned that "cut and splice" was required for the swap,
as the connectors are of different configuration.
----------
Instead of cutting, you could use a very small flat screw driver blade, inserted
into the plug, to compress the locking tang, in order to remove the metal
connector. Once out, just bend the tang up a bit and insert into the destination
connector. 

-- 
David Brown          Mailto:dbrown@mh1.mcis.uchicago.edu

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:39 EDT