An 88" V6 is not multiport injected like the magnum motors. The fuel is mixed
in the throttle body.
Walter_Felix@MSN.COM
Truck: 88 Dodge Dakota Sport 4x4.
Color: Flash Red
Motor: 3.9 V6
Tranny: A-500 Auto with NVP231 Transfer Case
Factory Accessories: AC, Cruise, Tilt, PW, PD, Rear Slider, Light Bar, Fog
Lamps & Covers
Aftermarket Mods: Lund Interceptor, Lund Moon Visor, Sony AM/FM/Cassette w/10
Disk Changer, ventguards, custom bed mat, black Dee-Zee tailgate protector,
Lund head-lamp blackouts, 4 Dick Cepek lamps with custom covers, cowl style
hood scoop, 3" TrailMaster body lift, 31x10.50x15 Dunlop Radial Mud Rovers on
15x10 AR Type 26 rims, X-Tang railed tonneau cover (cut and fitted to bed
bar), Lund TailMate, Rancho RS-5000 Shocks, FlowMaster 3" in/2 2-1/2" outlets,
BushWacker fender flares, Taylor 8mm wires (Red), "FABM", "DDBC", cranked
torsion bars.
http://www.geocities.com/MotorCity/Downs/9219
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net On Behalf Of T & J
Sent: Wednesday, April 29, 1998 1:05 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: Re: Swappin' Throttle Bodies
From:Tim Roller >starwolf@bewellnet.com
>By keeping the V-6 stock injectors you'll not give the engine an overly
shot of fuel. This would be the same as over-carburating in the older
vehicles. That's whats nice about a computered vehicle. It will sense an
abundance of AIR coming into the intake and automatically enrichen(hold the
injectors open an extra micro-second or longer) the mixture will be the same
as swapping to a larger carburator and you will(should) pass all the
sniffers. You may have to enlarge the V-6 hole openings for the butterflies
though.If after you do a sniffer test and pass with excellence then I would
experiment with injectors, but watch out--they're expensive. Hope this
helps.
-----Original Message-----
From: Michael Z-Sykes <MSykes@su.edu>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, April 28, 1998 5:10 PM
Subject: DML: Re: Swappin' Throttle Bodies
>So, what would be involved in swapping the V8 thrttle body to a
>V6?What do you mean by "keep the stock injectors"? Does that mean,
>use the V6 injectors on the V8 throttle body? Sorry about all the
>questions, but I've been trying to find a way to do this for a while. If I
can
>get some ponies out of it, I'm all about it! Thanks guys!!!
>-mike
>88V6DAKBABY
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:39 EDT