Has anyone had experience with painting the clear Lund Interceptor bug
shields???
I had a blue one, it cracked and Lund replaced it...but they were out of
blue tinted ones....So I took a paintable clear.....
Is there any special prep for the plastic??
Can I get away with using Duplicolor spray bombs???
At 09:34 PM 5/2/98 -0500, you wrote:
> This post is for the guy out in Alaska (I think) that has an emerald
> green dak like mine that shows ALL the scratches...
>
> If you have a Pep Boys in your neighborhood, pick up a tube of "GS27
> Scratch Remover". It's a little pricey at about $12-14 but you use
> such a small amount I imagine one tube will last the life of a truck.
> Also, I didn't ask the advice of the experts on this list about this
> product before I used it, so if I get totally flamed for causing
> irreparable damage to the finish on my truck, you might want to wait
> for a few posts before you try it...:o) All I know is that this stuff
> took out some pretty nasty scratches with one application. Be
> advised, a very small amount (less than a pea size) goes a long way
> and you don't need (or want) to rub too hard... Just small and lite
> pressure circles did the trick for me.
>
> BTW the scratches were caused by chaffing of the MOPAR front end bra
> against the left and right fenders. Go figure, I bought it to protect
> my front end paint and radiator when I do some highway driving...
> Stupid me for trying to be proactive!
>
> T.
> Boston, MA
>
>
>
>
"M ove O ver, P ickup A pproacing R apidly!"
1992 Dakota 4x4, Standard cab, short bed, 5.2 L V8, K&N, Gibson/Dynomax
exhaust,Power Puleys, MP SBEC, 180 degree thermostat, Bushwhackers,
tire/wheel package, Lund Moonvisor & Interceptor, Custom Cover tonneau,
Bundy rear bumper, chrome grillguard/pushbar
see http://www.usaor.net/users/zavetsky for pictures!
MOPAR or NOCAR!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:45 EDT