RE: RE: Alarms

From: Craig Baltzer (Craig.Baltzer@Anjura.COM)
Date: Sun May 03 1998 - 17:53:08 EDT


Mine was around $270-300 (Canadian $$$s) installed (the truck already
had remote keyless entry installed at the factory).

Craig

> -----Original Message-----
> From: |< R |> [SMTP:krp@netnitco.nett]
> Sent: Sunday, May 03, 1998 12:28 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: RE: Alarms
>
> > From: Craig Baltzer <Craig.Baltzer@Anjura.COM>
> > To: "'dakota-truck@buffnet.net'"
> <dakota-truck@buffnet.net>
> > Subject: DML: RE: Alarms
> > Date: Sun, 3 May 1998 01:03:54 -0400
> > Reply-to: dakota-truck@buffnet.net
>
> > It sounds like you have the "non-changing" transmitter Rob. The
> override
> > is the same as on the EVC II (i.e. the old "hidden switch"). The
> problem
> > on the factory CC ones is that the switch is always in the same
> place
> > :-). When I had the EVC II installed in the Dak at the dealer, I had
> > them use a non-standard installation location. It required some
> harness
> > modifications, but at least every 12 year old in town won't know
> exactly
> > where it is. Hopefully your Viper installer was a bit "original" in
> > where he located yours and didn't use the "recommended" location.
> >
> > Like 'ya say, if they want it bad, they came with a tow truck :-)...
> >
> > Craig
> >
> > -----Original Message-----
> > From: Rob Agnew [mailto:ragnew@islandnet.com]
> > Sent: May 3, 1998 12:51 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Alarms
> >
> >
> > ------------------------------
> >
> > Date: Sat, 2 May 1998 21:42:05 -0400
> > From: Craig Baltzer <Craig.Baltzer@Anjura.COM>
> > Subject: RE: DML: CC Alarm Systems
> >
> > Don't know about the EVC II setup in the Daks, but the CC factory
> alarm
> > in the Dodge Viper is a constantly changing one. The prob. is that
> just
> > about any idiot with access to the factory manual can "re-sync" the
> > transmitter with the car, so its not much good. I had heard that
> both
> > the Clifford and Viper after market alarms were the same (i.e. there
> was
> > a "re-sync" procedure that could be used without first gaining
> access to
> > the car, in case your transmitter battery went dead)...
> >
> > Craig
> >
>
>
> How much do these run installed? The dealer had one installed in my
> R/T, but wanted $500, so I had them yank it.
>
> |{eith R. Phelps
>
>
> Cat..... the other white meat.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:45 EDT