Re: Rack and Pinion Change.

From: Sean_Meldrum@ittauto.com
Date: Tue May 26 1998 - 13:54:45 EDT

Next message: Sean_Meldrum@ittauto.com: "Re: Sticking throttle - parts dropped on the assembly line"
Previous message: Tony Mastres: "Blown Fuses"
Next in thread: Gary E. Klim: "Re: Rack and Pinion Change."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

>Hey Sean, The FSM for the 92 shows service procedures for a manual rack.
I
>assume that it was available at the time.

Hey..thanks Richard! Hmm.....anybody out there with a '97+ FSM show a
manual steering rack? I should check the measurements on the current setup
(distance between mounts). Possible to carry over the rack and simply have
different tie rods? Hmmm....

****** 97 RPM Dakota - 14.98 @ 91.76 ******

sean meldrum
Email @ Home: spm@c3net.net
Email @ Work: sean_meldrum@ittauto.com
webpage: http://surf.to/real-per4mance
Truck mods: http://www.geocities.com/MotorCity/Downs/7875/signature.txt

Next message: Sean_Meldrum@ittauto.com: "Re: Sticking throttle - parts dropped on the assembly line"
Previous message: Tony Mastres: "Blown Fuses"
Next in thread: Gary E. Klim: "Re: Rack and Pinion Change."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:50 EDT