>Jon Steiger wrote:
> I'm curious... I've seen a couple of references now about putting
> a bevel in the TB bores. What does this mean?
>
> Thanks!
>
>
> -Jon-
Jon,
After you cut off the shrouds around the top of the two
throttle body bores you will have a sharp 90 degree
angle into the bores. By sanding down this sharp
corner you will put a nice smooth bevel into the two
throttle body bores.
Mike Catlin
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:51 EDT