> I went to a local performance shop and bought a conical shaped K&N filter with a 3"
> inlet. I then removed my stock airbox (are you listening Jim) and temp. installed
> my 10" fabm to get me to a local muffler shop. I took along my stock airhat. There
> I reinstalled the airhat and had them bend a section of 3" alum.steel pipe. They
> also welded a 5/16 stud on the inside of the pipe. Of course the objective was to
> align the pipe opening with the airhat opening while the other end aligined to an
> semi-open space between the computer and the A/C line (97-98 Daks). I took the pipe
> home and cleaned it up with steel wool and soap. I installed it using a 10" bracket
> from the hardware store. You also need to beef up the old airbox bracket attached
> to the computer mount. Using the stock accordian boot I joined the airhat to the
> pipe and slipped the K&N on the other end. DAMN, outta space.More details avail.gs
Send pics!!!!!
-Scott
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:55 EDT