Thanks I played with the linkage and its starts in park now.
From: tomleake <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Date: Friday, June 19, 1998 11:33 PM
Subject: DML: Re: Trans Problem (Auto)
>The same switch works for park and neutral so I would guess that is in the
>linkage. If I were trying to Isolate the problem I would unhook the
>at the lever on the shifter on the trans, then run move it into neutral and
>park from there. If it still has problems then it is unrelated. If not
>linkage is not set right.
>From: Chris lang <email@example.com>
>To: DML <firstname.lastname@example.org>
>Date: Friday, June 19, 1998 5:05 PM
>Subject: DML: Trans Problem (Auto)
>>My truck is finally back together after my body lift and there is only one
>>problem left the truck will not start while in park, it starts up fine
>>in neutral but not in park. as part of the body lift there was a 3"
>>extension in the shifter linkage so i had to remove it but its back in now
>>and all the gears line up p is park d is drive and so on. Anyone have any
>>idea why it would only start in neutal could i have pulled a wire out
>>somewhere? i dont see anything hanging loose but who knows.
>>Any help would be great,
>>93 V8 4x4 3" Body lift
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:57 EDT