Just the info i needed. Nice picturea
----------
> From: Jon Steiger <stei0302@cs.fredonia.edu>
> To: dakota-truck@buffnet.net
> Subject: Re: DML: pulleys
> Date: Sunday, June 28, 1998 2:39 AM
>
> At 07:56 PM 6/27/98 -0400, you wrote:
> >How about giving me instructions to install the fan belt. How do you
get
> >the tension off the spring?
> >
>
> I'm not sure if its the same for all model years, but if it is, your
> truck has an automatic tensioner; just stick a 5/8" wrench on the
> tensioner and pull clockwise. The whole pulley will move and release
> the slack.
>
> The tensioner is circled in green in the following photo:
>
>
> http://www.cs.fredonia.edu/~stei0302/WWW/DAKOTA/UPGRADES/TSTAT/04.gif
>
>
> -Jon-
>
> .--- stei0302@cs.fredonia.edu ------------------------------------.
> | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
> | '96 Dodge Dakota v8 SLT CC (15.21@89.82), '96 Kolb FireFly 447 |
> `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:58 EDT
