In a message dated 98-07-08 22:48:42 EDT, you write:
<<
bolted mine so the rear bracket is almost touching the back end of the axle
bracket. I'm not happy with the angle, so I am going to drop the rear bracket
down about 1/2" to reangle the front. Idealy the traction bars should be
parrallel with the ground, and the snubber should be about 1/2" from the
spring. Tried to get the snubber as close to the leaf eye as I could. It hits
the top leaf just in front of where the second leaf starts.
George >>
Thats about where my home made and free set hits, and now my rear is level
with my front!! Spring is bent but the truck squats nicely!!!
Eric
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:04 EDT