I just looked at Mike Clark's home page and checked out his header
install - no clamps at all?!?!
http://web.wt.net/~mclark/thorley2.html
I think I'll at least smear some red rtv on it before I slip it in.
Tate
-----Original Message-----
From: Jim, Donna, Erin, and Brian [SMTP:leefam@wcc.net]
Sent: Saturday, July 18, 1998 7:43 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: MP y-pipe install question
At 07:17 PM 7/18/98 -0500, you wrote:
>The instructions for the installation of my MP headers and y don't
>mention anything about a clamp or sealer or anything where the two y
>pipe parts join under the tranny. Do you just literally put one in
>the other and it seals? MP tech line is closed on Saturday.
>
>Thanks,
>
>Tate
>
>
I would guess that there is supposed to be something to connect them.
If
no other parts are supplied to put those pipes together, may I
suggest
something? I don't think that they would stay together by themselves,
so
maybe a 10 lb sledge hammer would be of great help here. ;-)
Other than that, I don't know.
Brian
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:07 EDT