If thas character than my truck has tons of that with the nice keying
somebody gave me down the entire drivers side it matches the bent
crossmember nicely along with my custom hanger on the muffler that was made
in 10 minutes with an arc welder on a -30 degree day....
Chris
-----Original Message-----
From: HKUSP40578@aol.com <HKUSP40578@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, July 22, 1998 5:46 PM
Subject: Re: DML: RE: Bent Crossmember
>well I now have the tranny crossmember bent(stump), the transfer case brace
>somewhat tweaked(rocks from my Moab trip)....and the large brace under the
>radiator is also bent in(i hit a stump pretty hard!!!!)....none if them did
>anything to affect the frame nor ride quality....they build character!
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:08 EDT