HKUSP40578@aol.com wrote:
>
> Ok guys......one more.......the choice is still between Dynomax Super Turbo or
> Flowmaster's 50 Series 3 Chamber.......
> I need to know.......any muffler shouold fit if I get one with similar case
> size, the only thing I really need to look for is a center inlet and an offset
> outler muffler right?????????????? THANKS ALOT......
If it were my money, I'd go with the DynoMax Super Turbo... go to
the following link:
http://www.a-1performance.com/super_turbo/systems/index.htm#CHRYSLER
CORPORATION - TRUCKS
Look at the setup: notice how the muffler/pipe combo is 2 1/2" in
and 3" out for '97 and up Daks, while it is 2 3/4" in/out for
'92-'96. There must be something to the difference :-). If I
were ordering the muffler (I have a '97 v6), I'd use what DynoMax
ships in the kit for inlet/outlet dimensions. Between that, and
the fact that Mr. FABM recommends them, it makes the choice easy.
Have fun,
--
John Bell johnb@pswtech.com http://www.pswtech.com
"Things should be made as simple as possible, but not any simpler."
- Albert Einstein
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:10 EDT