Congratulations!!!!
-Jodi
jlewis@sharetech.com
'98 Dakota Sport
> -----Original Message-----
> From: Jim, Donna, Erin, and Brian [SMTP:leefam@wcc.net]
> Sent: Monday, September 28, 1998 9:19 PM
> To: dakota-truck@buffnet.net
> Subject: YESSSSSSSS!!!!!!!!! Was:RE: DML: Back from
> Houston...Arghhh!!
>
> YESSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!
>
> WOOOOHOOOOOOOOOOOOOO!!!!!!!!!!!!!
>
> IT"S FIXED!!!!!!!!!!!!!!!!!!!!!!!
>
> OH YEAH!!!!!!!!!!!!!!!!!!!!!!!!!!
>
>
> Well, if you couldn't tell, I fixed it. It took a while, but now it's
> done.
>
> After checking out the wires, and the coil, I decided to take off the
> distributer cap. Alll was well with it until I looked inside. Part
> of the
> rotor was missing(the tip). So when the coil fired on the
> distributer, the
> energy hit the area around the brass posts. All the plastic around
> the
> brass posts (on the inside) were melted and fried. The end of the
> rotor is
> covered w/melted plastic. It got more and more covered with melted
> plastic
> all the time while I was driving, until the rotor was so covered it
> couldn't fire. Well, at least that sounds like a good explaination to
> me.
> I still don't know what happened to the tip of the rotor, though.
>
> About the wheels, they fit perfectly....kinda. On the front
> (especially
> the drivers side), when the wheels are turned, they hit the a-arm. I
> am
> going to take care of this tonight. Here are some pics:
>
> www.geocities.com/MotorCity/Garage/4878/wheels.html
>
> ps - Aand no, the Furd Ranger is not mine, I took the pics at a
> friends
> house. He has the digital camera....
>
> Brian (My Baby's Back!!) Lee
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:09 EDT