Re: DML Stickers (almost there, finally)

From: Chad (mcc@negia.net)
Date: Thu Oct 01 1998 - 16:06:36 EDT


I agree. The Pentastar-DML logo is okay, but I think one that just said
www.dakota-truck.net would be great.

Chad

GSWillhite wrote:
>
> Jon I like the idea of having an OFFICIAL DML sticker
> on my Dak. I don't like the Pentastar-DML logo. Don't
> get me wrong I know some thinking has gone into that
> decal design. Would it be possible to order-buy one
> that is consolidated in design?
> One similar to the Scat Pak Ram w/maybe the D M L in
> a right hand slant behind the wheels would be super cool
> and maybe save having to plant 2 on your Dak.
>
> Are we locked in on the design ?
>
> GS
>
> >
> > I went to the local print shop tuesday to get some ballpark
> > prices on the DML Decals. There's a pretty big price range, depending
> > on the quantity. (Anywhere from $30-40 for one to $1 each for quantities
> > of 150-200.) So anyway, I have to get an idea of how many people would
> > be ordering these so I can figure out how many to get printed up, and
> > therefore how much its going to cost. :-)
> >
> > The sticker in question is this one here:
> >
> >
> > http://www.cs.fredonia.edu/~stei0302/www/dmlpics/other/sticker.jpg
> >
> > So, if you're interested in getting this sticker, could you please
> > e-mail me and let me know how many you'd want? Then I can check
> > to see what the cost would be. (If possible, please let me know
> > via private e-mail (jon@dakota-truck.net) so we don't clog up the
> > list.) Based on the earlier discussion about this, I think the cost
> > of each sticker will be less than $5.
> >
> > Also, if you'd like a color other than white, let me know what
> > color you'd be interested in (and how many of that color). (Color
> > costs more, but if everything is done all in one run, the cost isn't
> > too much more.)
> >
> > - --------------
> >
> > On a related subject, are we doing anything with the Ram graphic
> > that Eric's friend drew up? If I remember right, we were going to
> > sort've use it as the DML "drag racing logo"... I seem to recall a
> > few people talking about changing it a bit though. Are there
> > any changes we need to make, or should we go with it as it is?
> >
> >
> > Its at:
> >
> >
> > http://www.cs.fredonia.edu/~stei0302/www/dmlpics/other/eram01.gif
> >
> > If you're interested in this sticker, or one like it, let me know.
> > (along with how many you'd be interested in) If we're going to go
> > with it as it is, maybe we should just print up some of those too?
> > - ------------------------------------------
> >
> >
> >
> > Any suggestions as to size? I was thinking of making the DML
> > decal about the size (or width, anyway) of Mike's DDBC decal (about
> > 11 inches wide) so that it will be able to fit on the Dak's sliding
> > window, for those of you who want to put it there. (The '97+ Daks
> > look like they have a smaller sliding window; does anyone know
> > its dimensions? I should probably keep the sticker narrower than
> > that, just in case.)
> >
> > As far as the "skat pak" ram goes, any suggestions as to size there?
> > I get the feeling it should be a bit smaller, maybe 6 to 8 inches wide?
> >
> > - ----------
> >
> > Anyway, lemme know what you think about any or all of this stuff.
> >
> > Just to clarify, if you're discussing any of the above, feel free to
> > post it to the list, but if you're just sending a message to let me know
> > how many stickers you'd be interested in, then please send it to my
> > private e-mail (jon@dakota-truck.net) instead. Thanks!!
> >
> >
> > -Jon-
> >

-- 
If you ever drop your keys into a river of molten lava, let'em go,
because, man, they're gone.
By Jack Handy



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:31 EDT