Good luck on the evaporator core, Gene.
FYI - I get the BFG Drag Radials mounted today - too bad there's flash
flooding all over Dallas today - no racin' tonight.
-----Original Message-----
From: DodgeBoyz3@aol.com [SMTP:DodgeBoyz3@aol.com]
Sent: Thursday, October 01, 1998 6:19 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: My first R/T spank
In a message dated 9/30/98 11:01:22 PM Central Daylight Time,
Rekker21@aol.com
writes:
> Gene,
> whats up with getting the front end aligned already?
> Eric
>
Eric,
The Dak pulls to the right, and really bad too. I could see there was
an
alignment problem the first time I drove and then later just looked at
the
front wheel position. The right side seems to lean in at the top, and
of
course out at the bottom (not a front end expert)something was off.
And the dipstick.....................well....when I push it in the
tube all
the way, it jumps back out at me. Pops out about 3/4 in. or so. That
is not
cool! I called to check on it today and the service manager told me
"I don't
know what's up with that." They had the truck all day and couldn't
install a
bed cover, align the front end fix the dip stick. I also ordered the
door
entry guards. Hope they can install that without to much effort!
BAHAHAHAHAHA.........................................
Anyway that s Dodge service................Looks like I get to install
a new
evaporator core for the A/C in my 95 this W/E . As mine bit the dust
last Sat
at the Mopar race. Won $300 bones, but spent $166 on an evap
core............glad I have tool to do it myself!
Anyway, that the story////////////////////
Gene
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:32 EDT