RE: RE: Fault Code 32 HELP!

From: Joel Znamenacek (Joel@zracer.com)
Date: Sun Oct 11 1998 - 22:38:47 EDT


chekc to see if the tube is cracked. If it is way loose cut the stretched
part off and re-connect the tube/line to get a better fit.

Joel

-----Original Message-----
From: HKUSP40578@aol.com [mailto:HKUSP40578@aol.com]
Sent: Sunday, October 11, 1998 7:28 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Fault Code 32 HELP!

In a message dated 98-10-11 22:25:06 EDT, you write:

<< check the vacuum line going to the egr valve. If that is ok then replace
the
 valve.
 
 Joel >>

Should I check the vacuum line so that it is connected properly? or if it is
worn? if the line is bad would this produce a loud hissing noise coming from
the engine bay? about how much are the egr valves?
kyle



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:36 EDT