Duff,
I did use the relay that was provided (you have to). You will notice on
the relay there are 4 connectors on the bottom. Connector number 85 is where
you plug in the wire for the factory horn. Connector number 86 is for a
ground. Connector number 87 goes to the computer. And finally, connector
number 30 is for power. I mounted my horn where the factory air box was. So
l ran a wire around the back of the engine compartment (through the black
rubber seal that seals the back of the hood shut) to the battery. I placed a
30 amp inline fuse in between the bat and the wire.
Here is a very rough diagram:
______
| 85~~|~~~~~~~original horn wire.
battery~~~fuse~~~~|30 86~~~~~~~~ground
| 87~~|~~~~~~~~compressor
---------
Hope this helps. If you need any more help, don't hesitate to ask. Oh...and
l mounted the relay using one of the screws for the computer on the
fenderwell. Let us know how you like your horns.
Russ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:42 EDT