Brian,
No No No! This is like the header deal, If you want a set of R/T headpipes,
call JBA and they will log you as an order. The Y pipes are still being
prototed and I think they got all the Daks covered, so those will also be
available, but Imnot sure when. Jeff also alluded to the comcept of
re-offering the header deal to go along with a Y pipe/headpipe deal!!
Only the prototyping offer was a CA only thing and they are done...
BKB
-----Original Message-----
From: Jim, Donna, Erin, and Brian [mailto:leefam@wcc.net]
Sent: Wednesday, October 28, 1998 12:48 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Attention R/T owners!!! Headpipes!
At 11:18 AM 10/28/98 -0800, you wrote:
>DML,
>The JBA R/T headpipes are designed.
>The Good news:
>1.The cost will be 150.00 chrome plated, 200.00 ceramic coated.
>2. They will be available in December.
>3. They will be mandrel bent
>4. They will go as far back towards the cat as possible, to install it
>appears you will cut off the 1 foot of 1 7/8 dia inlet pipe on the cat
>(Yaaay)
>
>The bad news is as follows:
>1. The diameter is 2".
>2. They will not be available in SS. Chrome plated or ceramic coated 14
>gauge mild steel only!
>3. JBA needs at least 20-25 orders before they will move forward with
making
>these due to the new tooling/materials required and their R&D payback.
>
>Im going to go for it, that makes 1
>I need 20 more volunteers!! I know Jack H, Mike C, Chris S, Martin and
Alan
>were all interested prior to the actuality. Still interested?
>Jeff will be posting a blurb about these pipes, and some may differ from my
>blurb, so his is the final say!
>Ill post to the registry as well (Tim, are you out there??)
>I think it'll be an improvement, and probably a good one, and IMO the price
>is reasonable!
>BKB
>On Mon, 7 Sep 1998 00:00:40 -0400 (EDT), you wrote:
>
>
I still take it you need to live in Cali to volunteer.... If not, I want
to take part in it!!!
Brian
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:48 EDT