I would suggest not jacking up the front end, on my 93 I can get under it
easily. This way you could measure how much you are lifting the front end up.
I sprayed on penetrant lube on both side 10 minutes before I started. It
really is a simple way to get a lift up front. I cranked mine up about 3/4 of
an inch, so the front is level with the rear. I would also suggest to use a
pipe over the rachet to get more leverage. When both sides are the same and
how high you want them, bounce on the front bumper hard about 5 times and re
measure. With stock t bars you will have to check them about ocne a month
cause they do sag. Aftermarket t bars are available for $200 that are thicker
and wont sag. Good Luck.
Kyle
93 Dakota Sport 4x4
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:59 EDT