I had my rhino liner installed about 1 month ago, and when they did the
tailgate,
they chiseled? around the inspection plate, and took a drill and drilled
down to
the screws to expose the heads.... 'Cause in my case, if I ever need to
change
the center brake light, I need to take that plate off to get to the light
bulb (in the tailgate '95-96
model years).
Is that what you were looking for?
Sam '95 SLT
100,085 miles (*sniff sniff*)
-----Original Message-----
From: Dkota4by4@aol.com <Dkota4by4@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, November 18, 1998 3:09 PM
Subject: DML: Power Bolt help
>Well, I recieved the last of my goodies for my baby today. When l got home
>UPS had dropped off my Roll Top and my Power Bolt. The Power Bolt looks
like
>a good quality product. I went to install it and ran into one minor
problem.
>I have to remove the old tailgate latch assembly...no problem..right?
Wrong!
>I have a rhino liner and they covered over the 3 Torx screws inside the
bed.
>Any ideas on how to remove the screws? Thanks for all the help in advance.
>
>Russ
>97 CC 318 4X4
>Gibson dual, 160, 14" FABM, Rhino, Hitch, Python
>Mopar Perf headers sitting in the box
>Roll Top sitting in the box
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:02 EDT