They are stuck on with two sided tape. I just had my dor repainted; after
some moron dented it in a parking lot. Had a dealer had a real tough time
getting them. After 4 weeks I brought my truck in for an oil change and
found out they had them (thanks for the call) but it was a saturday and the
body shop was closed so one of the shop guys put them on (in the wrong
spot). So on the following monday, they were removed using a very how blow
dryer, wd40 and some persuation.
NUT
97 Dak SLT V8 4X4
-----Original Message-----
From: Thinknet <thinknet@mindspring.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Saturday, November 21, 1998 10:39 AM
Subject: Re: DML: Removal of SLT and Rubber
>if I remember correctly aren't there peg holes behind the v6/v8 on the
>front? anybody find this out and what did you do to fill them?
>
>Cuervo
>-----Original Message-----
>From: Bob Mankin <bob@cadpros.com>
>To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>Date: Friday, November 20, 1998 10:02 PM
>Subject: Re: DML: Removal of SLT and Rubber
>
>
>|Bob Nichols wrote:
>|>
>|> Has anybody removed the metal type SLT/Dodge insegnias and the rubber
>|> moulding on the side of the dak? I removes the DODGE letters on the
>|> tailgate and it was easy (hairdryer and WD40), but the stuff on the side
>|> looks like metal. Bob
>|
>|Slightly different materials on the side emblems, but can be removed in
>|the same manner. They are either a chromed plastic or pot metal, I can't
>|remember which, but I've already "shaved" mine off.
>|
>|Bob
>|
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:06 EDT