>What type of paint did you use and how did you paint the
>ram head in your engine compartment?
Thanks for the kind words.
I used red vinyl tape to do the ram head. I see that you have
an SLT so I'll assume that you know that the underhood pad with the
head pressed in is either part of the package or an option.
I got the pad from the parts dept. and was intending to paint
the pressed head but realized it might not be a good idea
because the material is so fibrous.
Before installing the pad, I used tracing paper to get the
outline of the head. I then used this and outlined it onto
some cardboard with carbon paper. I cut the cardboard outline
and adjusted them for fit. I then used the cardboard cutouts
and transferred the shapes to the (soft type) vinyl tape.
Had a real tough time finding someone who carried the size of
vinyl tape that I needed. I think it was about 9" x 12" and
cost me $5.00 CDN.
Bob
Burlington, Ontario
'97 CC Sport, 5.2L, 3.55 auto., flame red
Gibson duals, KN drop-in
Coloured-keyed grille guard, running boards
and hard tonneau cover
Deflectors, grille insert
AR-211 15x7 rims (4.75" backspace)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:24 EDT