I'm doin' a 3/5 this summer and I definitely doing a C-notch. Bottomin' out
sucks =)
-mike d.
>>> <bnich@bellatlantic.net> 12/08/98 03:03pm >>>
Jack Hilton III wrote:
>
> So Lance -
>
> To use the Western Chassis kit correctly , you have to do a notch in
the
> frame ?
>
> I don't like the idea of that personally .
>
> What is the kit like without using a notch ?
>
> Jack "notchless" Hilton
>
> The Dodge lowering consists of a shorter spring and
> >a beefier sway bar. If you stick with your R/T springs and just utilize
> >the lower control arm, you'll keep your handling but have a lower
center
> >of gravity and an even more improved ride. The rear is pretty much
> >unaffected by the kit, which consists of shackle/hanger relocators
and a
> >small c-notch.
Jack, My understanding is no notch for the 2/4, acually some say 3 in
the rear. But you definitly have to notch over 4" in the rear. Over 4 in
the rear is too much for me.
Bob "also notchless" Nichols
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:24 EDT