Re:Dak wheels

From: William T. Goldbach (goldbach@tellink.net)
Date: Sat Dec 12 1998 - 11:21:24 EST


Josh, I only know what comes on the 4X4s. It has a 4.50" (114mm) X 6-lug
bolt pattern. The backspacing on the stock 15X8 wheels is about 5.80" (I
just measured it). That equates to around a 33mm (positive offset).

I have 16X7.5 aftermarket wheels on it now. They have a 42mm positive
offset, which equates to around a 5.90" backspacing.

So, I'd say around 5.80"-5.90" is a good backspace for a 4X4 wheel in the
7.5" to 8" width.

I think the 2-wd wheels are quite different, but I'm not sure.

-Bill

>Date: Fri, 11 Dec 1998 20:07:38 EST
>From: BlKV8Dkota@aol.com
>Subject: DML: Dak wheels
>
>What is the bolt pattern on a 98 Dak and what is the backspacing?
>
>Josh



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:24 EDT