-----Original Message-----
From: Vladimir Ryall <vladimir@austin.rr.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, December 16, 1998 11:23 PM
Subject: DML: RE: 11sec dak- How I did it
Looks like someone is about to replace a cylinder wall...however...you won't be the first...or the last... :)
VLAD
96 Indy
I'm not sure how to take your comment Mr Ryall. I've talked to a lot of people @ Mopar about the limits of a stock shortblock, and I feel like I'm within the bounds of its integrity;however close. If your worried about breaking parts, however, you should probably take up stamp collecting. It'll be much safer for you.
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Tom & Fern Moffat
Sent: Tuesday, June 30, 1998 6:07 PM
To: dml list
Subject: DML: 11sec dak- How I did it
Greetings!
From a new DML subscriber. I finally broke down and bought a computer. I guess its because I' ve been spending to much time on my truck!
The first thing I' d like to say is that is no max-effort, high dollar race truck. Any member can easily replicate what I' ve done for a relatively modest investment.
MODS:
318 stock short block
Magnum heads- Hughes stage 1 port job(stock valves) int=240cfm/exh=180@ 500 lift
valvetrain-RC performance pushrods,retainers&keepers; comp cams -custom grind cam 512/520 lift; duration 206/212 @ .0500; 112 seperation; crower roller rockers 1.72 ratio
Intake- M-1 single plane drilled for fuel injectors
(24lb)
Throttle body- bored by AST in Houston
Ignition- MSD 6a
Power adder- Nitrous Express Gemini plate system -150HP (adjustable)
Regulator- mallory FP regulator on return line (92 daks)
Headers- Doug Thorley.no cat, 3" to the back,Warlock bypass muffler
Tranny- 518 2600 stall,shift kit
rearend- stock 3.92
Tires-MT ET streets 28X10
That about covers it. This truck is driven daily getting 16mpg. This truck use to have a vortech s-trim putting out 10 lbs of boost. I' ve learned quite a bit over the years about this truck. I hope the members find it useful.
Sorry I almost forgot:
ET: 11.5 @118 (150 shot N20)
60ft:1.70
Motor:13.2 @103.8
PS I just added a 3800 stall converter and Weld wheels(5 lug coversion) I'm going to the track this friday at Baytown,TX. Anyone care to join-come on!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:28 EDT