Frank,
Thanks for the tip, did you happen to see that article I was talking about,
and if so, what do you think about their conclusions? I have solved the
problem of the gasket, I had the new intake extrude-honed and teflon coated
and the plate welded to the bottom.
VLAD
96 Indy
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
Holloway,Frank T
Sent: Sunday, December 20, 1998 2:24 AM
To: 'dakota-truck@buffnet.net'
Subject: RE: DML: Re:Intake Manifold Attn. VLAD
A couple of thoughts here. In talking with Jim Bell (Kenne Bell Perf.
Products), he said that they were having problems with the intake manifold
plate gasket. They have a special gasket that they include with their
supercharger kits to correct the problem. He even indicated that he has seen
many manifolds leak on stock motors. If the plate gasket were to leak, there
would be soot in the intake track but every engine I have worked on with a
dry intake system has the black soot. Every used TB that we have pulled
apart is the same way, especially the IAC passages, so I don't think it is
unusual. If you are going to remove your manifold, check the gasket and you
might give Jim @ Kenne Bell a call. I am sure he can provide some
assistance.....
Frank
> -----Original Message-----
> From: Vladimir Ryall [SMTP:vladimir@austin.rr.com]
> Sent: Friday, December 18, 1998 10:02 PM
> To: dakota-truck@buffnet.net
> Subject: RE: DML: Re: MP SBEC, bad pinging problem, please help!
>
> I was curious if anyone read the article in the latest Mopar muscle about
> the reason why this buildup occurs. When I removed my TB and looked in
> the
> intake, it looked like a chimney. The black soot like material was very
> apparent. I gathered from the article that this symptom indicates a leaky
> manifold gasket(the one underneath these magnum intakes. It also stated
> it
> caused performance loss, YIKES !!! I am about to replace my manifold over
> the next few weeks anyway, but, I really did not like what I saw. Help me
> out here someone, it was Mopar muscle I read this in, right?
>
> VLAD
> 96 Indy
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Christopher
> J. Lang
> Sent: Friday, December 18, 1998 11:15 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Re: MP SBEC, bad pinging problem, please help!
>
>
> I have some on mine what does that mean?
>
>
> Chris
>
>
> -----Original Message-----
> From: Bob Tom <tigers@bserv.com>
> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> Date: Friday, December 18, 1998 5:44 PM
> Subject: Re: DML: Re: MP SBEC, bad pinging problem, please help!
>
>
> >Jeff, any carbon deposit build-up on the throttle plate?
> >
> >Bob
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:29 EDT