Thanks.....I will look into it when I am ready to rock and roll.....
Jason
12/22/98 10:30 AM
-----Original Message-----
From: Dkota4by4@aol.com [SMTP:Dkota4by4@aol.com]
Sent: Tuesday, December 22, 1998 10:00 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Mike Leach/Mopar header web site
Jason,
I have a 4x4..so my application was a little different.
However, I had to
cut my old system off. This made it impossible to connect the
Mopar/Leach
headers. I went to my local muffler shop and he mandrel ment a
8 inch piece
of 2.5" tubing and welded everything up for me. Took him about
45 min. He
also went over all my bolts and checked for leaks and tightened
everything
down to spec. for me. Grand total for all this was $30. Just
thought I would
let you know...it isn't that much.
Russ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:30 EDT