In a message dated 12/22/98 12:49:41 AM Eastern Standard Time, WM96@aol.com
writes:
<< Aren't some people on the list using these on their trucks? Do they bolt
right on or is there some sort fabrication required? The one's I'm looking
at
are the universal chrom p/n LAK-20470. >>
Will
I have a set and Jon has a set. Mine bolted right on but did required some
spacers on the rear U-bolt to tip the front up to the right clearance. I have
mine slid all the way ahead and the snubber in the front hole. The snubber is
still a little short of the spring eye but seems to work OK. You can buy the
shims (spacers) but I made some out of some scrap metal I had lying around. I
would like something less noticable but haven't found what I'm looking for
yet.
Bill
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:30 EDT