Dude, the reason you can't get that link to work is because I had a
malfunction in the brain-finger interface connection. the correct address-
http://racenet.net/exh/jba.htm
OOOOOOPPPS! dadoctah@worldnet.att.net
----------
>From: Jack Hilton III <HEMI@charter.net>
>To: dakota-truck@buffnet.net
>Subject: Re: DML: sweet headers for a reasonable price(Jason)
>Date: Sun, Dec 27, 1998, 2:54 PM
>
>
>Dude , I can't get that link to work .
>
>
>At 11:33 PM 12/26/98 +0000, you wrote:
>>I checked a place called Internet Racers Supply
>>(http://racernet.net/exh/jba.htm) and they have the JBA stainless steel
>>bolt-in headers for the 97 Dakota 5.2 for $374.95 RETAIL! This price also
>>includes S&H to the conus (SH*T! That means I got to pay through the nose
>>for mine). We would better off dealing with these people for our group buy.
>>There was no info on the site about coatings, but I'm sure you could ask
>>about that. Even at that price, I would go for it.If they give
>>us a group deal, so much the better.
>>
>>I saw a dyno test in a mag that the JBA shorties Matched the numbers of the
>>JBA full lenghts. And
>>I took a look under my truck this afternoon and was checking out the Y-pipe.
>>The factory setup (at
>>least on the 97's is pretty good. There are nice radii and the collector is
>>well formed. The tubing diameter is not huge but it seems more than adequate
>>for "natural" power.
>> dadoctah@worldnet.att.net
>>
>>----------
>>>From: Jason Jennings <jason@spray-tech.com>
>>>To: "'dakota-truck@buffnet.net'" <dakota-truck@buffnet.net>
>>>Subject: RE: DML: sweet headers for a reasonable price
>>>Date: Mon, Dec 21, 1998, 4:21 PM
>>>
>>
>>>I called Mr. Jeff Bells inquiring about our DML group purchase for the
>>>JBA headers. He referred me to Joe at ex. 104. It seems Joe will be
>>>handling the purchase of the headers for the DML buyers. He quoted me a
>>>price of $398 in change for stainless non-ceramic coating, and $133 in
>>>change or $130 something in change for the ceramic coating plus $16 for
>>>shipping & handling. I asked him for a time frame or deadline of
>>>purchase. He was going with the past group buy. It seems there was a
>>>30 day type of arrangement???? I just wanted to pass the info on.
>>>Thanks....
>>>
>>>
>>>
>>>
>>>Jason
>>>12/21/98 11:26 AM
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Jack Hilton III [SMTP:HEMI@charter.net]
>>> Sent: Sunday, December 20, 1998 7:23 PM
>>> To: dakota-truck@buffnet.net
>>> Subject: RE: DML: sweet headers for a reasonable price
>>>
>>>
>>> Good goin , Bruce !!
>>>
>>> I haven't talked to Jeff in a while , and I'll forward this to
>>>the Dakota
>>> R/T list too !
>>>
>>>
>>>
>>>
>>> At 02:21 PM 12/18/98 -0800, you wrote:
>>> >DML,
>>> >For R/T owners, Jeff Bell @ JBA has said that if you order the
>>>headpipes (2"
>>> >mandrel bent, 150.00 for chrome, 200.00 for ceramic coating)
>>>then you can
>>> >order the headers at the DML group purchase price. Not a bad
>>>deal if you
>>> >are interested in shorty headers and cant change the headpipe
>>>style to a Y
>>> >(CA smog , CARB etc...)
>>> >Jeff Bells # @JBA: 619.265-3056x105
>>> >BKB
>>> >
>>> >-----Original Message-----
>>> >From: Jason Yates [mailto:j_hurricane_y@yahoo.com]
>>> >Sent: Friday, December 18, 1998 11:54 AM
>>> >To: dakota-truck@buffnet.net
>>> >Subject: RE: DML: sweet headers for a reasonable price
>>> >
>>> >
>>> >Another Jason is interested too, although I have a '98 Dak with
>>>the
>>> >318. I'd certainly love to be part of a discount like that.
>>>The DML
>>> >kicks $#@!
>>> >
>>> >Thanks,
>>> >JY
>>> >
>>> >
>>> >
>>> >---Jason Jennings wrote:
>>> >>
>>> >> I am in if the group wants to buy for the end of Jan........
>>>Thanks
>>> >and
>>> >> keep me in mind please....
>>> >>
>>> >>
>>> >>
>>> >> Jason
>>> >> 12/18/98 2:36 PM
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> -----Original Message-----
>>> >> From: Jack Hilton III [SMTP:HEMI@charter.net]
>>> >> Sent: Friday, December 18, 1998 2:14 PM
>>> >> To: dakota-truck@buffnet.net
>>> >> Subject: Re: DML: sweet headers for a reasonable
>>>price
>>> >>
>>> >> We are going to see how many are interested enough to
>>>approach
>>> >> JBA for
>>> >> another group purchase in about the end of January .
>>> >>
>>> >> I got the Stainless Steel Ceramic Coated headers for my
>>>R/T for
>>> >> like $385
>>> >> after shipping .
>>> >>
>>> >> stay tuned .
>>> >>
>>> >>
>>> >> At 12:52 PM 12/18/1998 -0500, you wrote:
>>> >> >Does anyone have info on after market headers for a '99
>>> >> R/T..... I have
>>> >> >checked out the JBA web site, and it is just a little
>>>steep for
>>> >> my
>>> >> >wallet. I would love to find a nice set of kick ***
>>>headers to
>>> >> install,
>>> >> >and would enjoy them more at a reasonable price.....
>>>Thanks.
>>> >> >
>>> >> >
>>> >> >
>>> >> >Jason
>>> >> >12/18/98 12:55 PM
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> Jack Hilton
>>> >>
>>> >> HEMI@charter.net
>>> >>
>>> >>
>>> >
>>> >_________________________________________________________
>>> >DO YOU YAHOO!?
>>> >Get your free @yahoo.com address at http://mail.yahoo.com
>>> >
>>> >
>>>
>>>
>>> W . Jack Hilton III
>>>
>>> HEMI@charter.net
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
>W . Jack Hilton III
>
>HEMI@charter.net
>
>
>
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:31 EDT