1/4 - 20 steel rod: $1.50 - Home Depot (Gives ya 3 feet to play around
with...just to get it right.) :)
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Mark Kuzia
Sent: Wednesday, January 13, 1999 7:15 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: TB mods now listed on my page
Its a Mr. Gasket carb stud kit. Any speed shop will sell it. I paid
$2.99 at Auto Works. You do have to bend it yourself, the stock plate blocks
about 30% of the bore.
Mark
-----Original Message-----
From: Adam Bergman <bude2@gate.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, January 12, 1999 9:10 PM
Subject: Re: DML: TB mods now listed on my page
Where do you get the "S" shaped threaded shaft for the throttle
body?
Adam '99 CC 5.2L 5speed
Mark Kuzia wrote:
I have finally completed the the t-body modifications section
on my home page. I detailed what I did and tried to give as many details on
modifying a stock t-body. The mods are free if you have the tools. I hope I
can help a few of you out there with your mods. E-mail me if I left anything
out that you need to know. http://home.att.net/~flyboy01 Mark
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:57 EDT