bnich@bellatlantic.net wrote:
>
> Holloway,Frank T wrote:
> >
> > We have two of the V-6 TB's going out this week. Should be fun to see what
> > we can get out of these.....
> >
> > Frank
> >
> > > -----Original Message-----
> > > From: Thomas Wood [SMTP:twood1@PHEAA.ORG]
> > > Sent: Monday, January 11, 1999 2:28 PM
> > > To: dakota-truck@buffnet.net
> > > Subject: Re: DML: RE: TBI Question: Attn. GS
> > >
> > > On a side note, keep us (the list) up to date on any testing you do for
> > > the
> > > v6 thottle bodies. I'm all into this when they are available.
> > >
> > > T. Matt
> > > Harrisburg, PA
> > >
> > > At 01:52 PM 1/11/99 -0800, you wrote:
> > > >GS,
> > > >There are a couple of routes that we can go with this and it would be
> > > pretty
> > > >much dependent on what the machine shop did for you. Do you know if they
> > > did
> > > >any machine work on the bores, and did they have the shaft out of the
> > > TB???
> > > >We locktite the throttle plate machine screws in place. If your machine
> > > shop
> > > >used locktite, then the only to remove the screws is with heat. I am
> > > almost
> > > >afraid that if you got into it and found something unique to the TB, you
> > > >might not be able to get it back together in a short time. How about
> > > this,
> > > >we can ship you a TB to use, you ship us yours and I will go through it.
> > > We
> > > >can shave the top, and at minimum polish out the bores, if the
> > > compression
> > > >area of the bores need to be opened up even further, we can do that, at
> > > the
> > > >same time I can install the new SS shaft for you and ship it back out.
> > > Then
> > > >just return our TB back to us. If you want to tackle this yourself, I
> > > would
> > > >be glad to ship a new shaft out to you. Let me know what you want to
> > > >do......
> > > >
> > > > Frank
> > > >
> > > >> -----Original Message-----
> > > >> From: GSWillhite [SMTP:GSWillhite@ualr.edu]
> > > >> Sent: Monday, January 11, 1999 11:20 AM
> > > >> To: dakota-truck@buffnet.net
> > > >> Subject: DML: TBI Question: Bruce, Frank, Jules....
> > > >>
> > > >> Last summer I had my TBI ported at a machine shop and now
> > > >> I'd like to do the butterflys and the shaft. Do you guys
> > > >> have a modified shaft kit w/butterflies and hardware for
> > > >> sale? I really don't want my truck to be down too long so
> > > >> a quick replacement on hand would be great.
> > > >>
> > > >> Thanks
> > > >>
> > > >> GS -
> > > >>
> > > >> 98 5.2L 5spd
> > > >
> > > >
>
> Frank, Am I up for one? Bob Nichols
Frank, Hate to be a pain in the ars, but I was wondering if one of the
6er TB's is coming my way?? Bob Nichols
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:01 EDT