$240 for the set of four (pre-painted), go to the dealer and ask to see their accessory parts book, not the brouchure. If you order them seperately, they are $111 each. installation took less than 10 min per wheel
Mark
http://home.att.net/~flyboy01/
-----Original Message-----
From: Bernd D. Ratsch <bernd@texas.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Monday, January 25, 1999 8:34 AM
Subject: RE: DML: Wheel back-spacing(Mark)
How much did the fender flares cost...part number??
Bernd D. Ratsch
Pflugerville, TX
bernd@texas.net
http://lonestar.texas.net/~bernd
1997 Dakota SLT-CC (3.9L)
License Plate Frame: "Don't Follow Me...I'm Trolling for Toyota's"
Song for the Day: "Gonna buy me a Dodge Truck and blow those Fords off the road....."
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Patrick Delgado
Sent: Monday, January 25, 1999 1:25 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Wheel back-spacing(Mark)
Mark,
On my 97, I'm using 275-60-15's all around on my 15X8's with no problems. They fit and look great. However, I have the fender flares from the 4X4 on my 4X2. Without them the tires would probably peek out about 1/2" from stock fender well.
What are you using to lower 1"/3"? Where did you get it and how much?
Dr. Pat
----------
From: Mark Kuzia <flyboy01@worldnet.att.net>
To: dakota-truck@buffnet.net
Subject: DML: Wheel back-spacing questions
Date: Mon, Jan 25, 1999, 2:05 AM
Help,
I'm buying a new set of wheels for my 99' Dakota Sport.
1. I need to know the stock backspacing with the 15x7, 15x8 (what I have), and the R/T 17x9 wheels.
2. Has anyone run into tire clearance problems with bigger wheels? I'm lowering the truck 1" front/3" rear.
3. What is the minumum and maximum backspacing for the 16x8 wheels?
Thanks
Mark
http://home.att.net/~flyboy01
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:13 EDT