Aren't you looking for 6er valve covers? Mopar does have a set of chrome
3.9L covers. #P4452042. I don't know how high they are. FYI.
----------
> From: Jon Steiger <stei0302@cs.fredonia.edu>
> To: dakota-truck@buffnet.net
> Subject: Re: DML: RE: Keeping it covered..........
> Date: Monday, January 25, 1999 12:19 PM
>
>
> On Mon, 25 Jan 1999, Thomas Vacchino wrote:
>
> > Yes I've thought about doing that also..............But I would really
like a
> > nice set of Valve covers to replace the stock ones. But considering the
luck
> > I've been having so far, I will probably have to do some sort of
riser/gasket
> > set-up. Thanks for the input though!!
> >
>
> Here's another option that might help. The older "LA" valve covers
will
> fit on the Magnums too! They only have 5 holes as opposed to our 10, but
> they are a subset of the Magnum bolt pattern. With a good gasket sealer
> ("Right Stuff"?) They'll work fine.
>
> Sean Meldrum did this on his '97 Dak. When he sold it, I bought the
> covers from him, and I'm planning to put 'em on my '96 in the spring. I
> don't know if there is any more clearance from the older covers or not
> though.
>
> For more info, there's a little write-up with pictures in the upgrades
> and mods section:
>
> http://www.cs.fredonia.edu/~stei0302/WWW/DAKOTA/UPGRADES/LAVALVECOVERS/
>
>
> -Jon-
>
> .--- stei0302@cs.fredonia.edu ----------------------------------------.
> | Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
> | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
> `--------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:14 EDT