Bob,
Destination not currently served by UPS...?????
Heres the address we tried to send it to:
46 Birch ave.
W Milford
New Jersey
07480
Does UPS serve your area?
We might have screwed up the address, but it will be back at Frank's house
today. If its a UPS screw up, they will send it out next day. If its real,
well send it by US mail next day or UPS next day...???
What say??
Bruce
-----Original Message-----
From: bnich@bellatlantic.net [mailto:bnich@bellatlantic.net]
Sent: Monday, January 11, 1999 5:08 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: TBI (Frank)
Holloway,Frank T wrote:
>
> We have two of the V-6 TB's going out this week. Should be fun to see what
> we can get out of these.....
>
> Frank
>
> > -----Original Message-----
> > From: Thomas Wood [SMTP:twood1@PHEAA.ORG]
> > Sent: Monday, January 11, 1999 2:28 PM
> > To: dakota-truck@buffnet.net
> > Subject: Re: DML: RE: TBI Question: Attn. GS
> >
> > On a side note, keep us (the list) up to date on any testing you do for
> > the
> > v6 thottle bodies. I'm all into this when they are available.
> >
> > T. Matt
> > Harrisburg, PA
> >
> > At 01:52 PM 1/11/99 -0800, you wrote:
> > >GS,
> > >There are a couple of routes that we can go with this and it would be
> > pretty
> > >much dependent on what the machine shop did for you. Do you know if
they
> > did
> > >any machine work on the bores, and did they have the shaft out of the
> > TB???
> > >We locktite the throttle plate machine screws in place. If your machine
> > shop
> > >used locktite, then the only to remove the screws is with heat. I am
> > almost
> > >afraid that if you got into it and found something unique to the TB,
you
> > >might not be able to get it back together in a short time. How about
> > this,
> > >we can ship you a TB to use, you ship us yours and I will go through
it.
> > We
> > >can shave the top, and at minimum polish out the bores, if the
> > compression
> > >area of the bores need to be opened up even further, we can do that, at
> > the
> > >same time I can install the new SS shaft for you and ship it back out.
> > Then
> > >just return our TB back to us. If you want to tackle this yourself, I
> > would
> > >be glad to ship a new shaft out to you. Let me know what you want to
> > >do......
> > >
> > > Frank
> > >
> > >> -----Original Message-----
> > >> From: GSWillhite [SMTP:GSWillhite@ualr.edu]
> > >> Sent: Monday, January 11, 1999 11:20 AM
> > >> To: dakota-truck@buffnet.net
> > >> Subject: DML: TBI Question: Bruce, Frank, Jules....
> > >>
> > >> Last summer I had my TBI ported at a machine shop and now
> > >> I'd like to do the butterflys and the shaft. Do you guys
> > >> have a modified shaft kit w/butterflies and hardware for
> > >> sale? I really don't want my truck to be down too long so
> > >> a quick replacement on hand would be great.
> > >>
> > >> Thanks
> > >>
> > >> GS -
> > >>
> > >> 98 5.2L 5spd
> > >
> > >
Frank, Am I up for one? Bob Nichols
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:18 EDT