DML Digest wrote:
>
> DML Digest Friday, February 19 1999 Volume 04 : Number 342
>
> The subjects discussed in this digest are:
> ==========
> Re: DML: HAM in a Dak -- Found Problem
> Re: DML: Good exhaust for '99 R/T
> Re: DML: Chevy Vortec V8?
> Re: DML: Discount Dodge parts
> DML: RE: Stock location K&N...50-80HP... WOW!
> RE: DML: Mopar Headers
> DML: '87 Dakota overheating
>
> ----------------------------------------------------------------------
>
> Date: Thu, 18 Feb 1999 22:30:42 -0600
> From: jim miller <jmiller@texnet.net>
> Subject: Re: DML: HAM in a Dak -- Found Problem
>
> I have used my dual band AL600 HT in my 98 and my 99 R/T and have had no
> problems and I don't understand how an airbag could cause interference.
>
> "Shane L. Placeway" wrote:
>
> > Are you using a 2m HT? When you say stock antenna, are you meaning the
> > rubber ducky on the HT? Seems very strange that the air bag is causing
> > the interference. Do you have a mag mount you can try instead of the
> > ducky? Is this happening only when you have the unit plugged into the
> > aux. 12v? Do you have a DC filtered cig plug adapter for your HT?
> >
> > --
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> > Shane L. Placeway
> > NØZOW
> > mailto:Placeway@bigfoot.com
> > ICQ# 3112229
> >
> > "He Who dies with the most toys, Wins!"
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
> ------------------------------
>
> Date: Thu, 18 Feb 1999 22:36:57 -0600
> From: jim miller <jmiller@texnet.net>
> Subject: Re: DML: Good exhaust for '99 R/T
>
> sounds even better with headers!
>
> HapaboyONE@aol.com wrote:
>
> > have you heard the stock exaust for an R/T?....I heard one start up at the
> > dealer....and WOOOHOOOO, that thing sounded good! pretty throaty too.!
>
> ------------------------------
>
> Date: Thu, 18 Feb 1999 22:42:06 -0600
> From: jim miller <jmiller@texnet.net>
> Subject: Re: DML: Chevy Vortec V8?
>
> Have you noticed that Ferd is claiming the SAME THING. Also when Chevy
> claims they have a more powerful V8, They DO! But remember Chevy does not
> make a V10.
> That is how they get away with saying a more powerful V8.
>
> Jon Steiger wrote:
>
> > Hey, what's the deal with all the Chebby commercials lately
> > saying that their truck comes with a V8 more powerful than Ferd
> > or Dodge? Are they lying about their horsepower figures
> > again, or is this for real? (And if it is, what is Ma Mopar
> > doing about it?) :-)
> >
> > -Jon-
> >
> > .--- stei0302@cs.fredonia.edu ----------------------------------------.
> > | Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
> > | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
> > `--------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
>
> ------------------------------
>
> Date: Thu, 18 Feb 1999 22:47:38 -0600
> From: jim miller <jmiller@texnet.net>
> Subject: Re: DML: Discount Dodge parts
>
> buymopar@ipa.net. Springdale Dodge will sell any mopar part at 10% over cost.
> Email Arnold or Steven.
>
> "Parker, Jon" wrote:
>
> > Anyone know of any web sites/Dodge dealers that sell Mopar accessories at a
> > discount? I'm looking for a set of DAK slush mats.
> >
> > Thanks.
> >
> > Jon
> >
> > (on order) 1999 CC V8 4x4 Sport+
>
> ------------------------------
>
> Date: Thu, 18 Feb 1999 22:49:16 -0600
> From: Vladimir Ryall <vladimir@austin.rr.com>
> Subject: DML: RE: Stock location K&N...50-80HP... WOW!
>
> Sorry, not likely...
>
> Vladimir "FASRAM"
> Home: http://home.austin.rr.com/fasram/
> Member: http://www.indyram.org/
>
> - -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
> Dak99RT@aol.com
> Sent: Thursday, February 18, 1999 3:25 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Stock location K&N...50-80HP... WOW!
>
> In a message dated 2/17/99 10:41:28 PM Eastern Standard Time,
> FLFish2020@aol.com writes:
>
> << In response to your letter, about the conical k&n fiter not helping but
> makint
> it worse, I agree, although I have a 97 Dodge Dakota, 2.5 liter engine I
> know
> wh at you mean, as I put a dynomax turbo muffler and conical filter and had
> put a drop in k&n to see the difference and by far the drop in, was better,
> in
> fact my quarter mile speed was almost 5-8 mph faster with the drop in...
> >>
>
> Wow... that means that a K&N filter in the stock filter location compared to
> a
> cone K&N works out to about 50-80 extra horsepower???? :-)~
> Charles
>
> ------------------------------
>
> Date: Thu, 18 Feb 1999 22:51:07 -0600
> From: Vladimir Ryall <vladimir@austin.rr.com>
> Subject: RE: DML: Mopar Headers
>
> The Mopar Headers are worht the extra expense anyway. Good solid header
> that should last for a long while.
>
> Vladimir "FASRAM"
> Home: http://home.austin.rr.com/fasram/
> Member: http://www.indyram.org/
>
> - -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of John Neff
> Sent: Thursday, February 18, 1999 5:43 PM
> To: DML
> Subject: RE: DML: Mopar Headers
>
> The group purchase price on the Mopar (Mike Leach) Headers is $431.00 plus
> shipping. This includes a very nice Y-Pipe and all hardware. You can get
> allot of info on these units on my web site as well as the DML group buy
> page. The group buy does not have a cut off date, so you can order them all
> year long or when ever you have the money to buy them. Mike will take just
> about any normal method of payment, including check, money order or credit
> card. Just tell Mike you are part of the DML and want the "Neff group
> purchase".
> BTW, This is extended to anyone with a Durango or Ram truck as well.
>
> John
> 98 Dak 4X4 CC Sport, 5.2L, Auto, Leach Headers, DDBC
> http://lonestar.texas.net/~jndneff/dakota/headers/headers.html
>
> <snip>
> i just had a shock.
> i called a dealer today for the price for the mopar headers
> $625!!!...not sure if it includes the y-pipe.
> Is this about what you guys paid?
>
> The JBA group deal still on?
> <unsnip>
>
> ------------------------------
>
> Date: Thu, 18 Feb 1999 23:58:20 -0500
> From: Doug Myers <dougmyers@radix.net>
> Subject: DML: '87 Dakota overheating
>
> Hey guys,
>
> My little brother has a '87 Dakota 2.2/5-speed and the gauge keeps
> indicating that the truck is overheating, but the coolant is only reaching
> 188 degrees. He's changed the guage, sending unit, thermostat, and radiator
> (which was bad anyways). Does anyone have any ideas what might be causing
> this?
>
> Doug
> '99 Dakota 5.2/5-speed/3.92SG
>
> ------------------------------
>
> End of DML Digest V4 #342
> *************************
Patrick, My rims are the split spokes that come with the t&h package.
I
think they are 8". I've been told that the 275 will fit on the rim, but
they wonder about whether the tire will rub on something, lock to lock.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:39 EDT