You need new shocks for front and rear.
Summit house brand $104 front and rear
Doescht Tech $160 Front and rear
Ground Force $120 front and rear
Mark
flyboy01@worldnet.att.net
-----Original Message-----
From: Adam Bergman <bude2@gate.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Saturday, February 20, 1999 8:30 PM
Subject: Re: DML: Lowering Blocks
>Thanks to all for the info on the lowering blocks. One more thing, will the
rear
>shock operate the same way after being lowered or should is there a shock
mount
>extension available?
>
>Thanks again,
>
>Adam '99 CC, Sport, V8, 5peed, 3.92SG
>
>Mark Kuzia wrote:
>
>> I ordered the AIM lowering blocks for my 99' Dakota yesterday. I bought
them
>> because they were "extruded", not cast AIM guarantees them not to break!
>> Steel would be nice but I could not find anyone who made them "angle
>> corrected". The AIM are. The following is an excerpt from their catalog:
>>
>> AIM'S EXTRUDED ALUMINUM LOWERING BLOCK WILL NEVER BREAK LIKE OTHER
BLOCKS.
>> OTHER BLOCKS ARE MADE FROM "CAST" RECYCLED ALUMINUM THAT IS BRITTLE.
AIM'S
>> BLOCKS HAVE MACHINED STEEL PINS MATED TO ANGLED "DRIVE-LINE PINON"
CORRECT
>> BLOCKS. THIS MEANS YOUR DRIVE-LINE WILL NOT MAKE NOISE AND WEAR YOUR
PINION
>> GEAR OUT. ANOTHER QUALITY PRODUCT FROM AIM INDUSTRIES - lifetime warranty
>> too............
>>
>> Mark
>> http://home.att.net/~flyboy01
>>
>> -----Original Message-----
>> From: AJRoss50@aol.com <AJRoss50@aol.com>
>> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>> Date: Friday, February 19, 1999 6:33 PM
>> Subject: Re: DML: Lowering Blocks
>>
>> >>Does anyone know where to get good 2" lowering blocks? Are steel better
>> >>than aluminum? Any information would ne appreciated.
>> >
>> >>Thanks,
>> >
>> >>Adam 5.2, 5speed, 3.92 SG
>> >
>> >Steel are better than aluminum. Try to stay away from aluminum blocks
>> unless
>> >they are forged aluminum. Try www.aimind.com They also advertise in
>> >Truckin' and Sport Truck.
>> >
>> >Alex
>> >97 CC Sport V8 5spd
>> >Airaid Intake, Gibson cat-back, Pioneer CD, BFG Radial T/A's
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:41 EDT