As I'm starting to get real serious with some major
engine mods (port & polish 3-angle valve job) along
with a Hughes' cam, pushrods, springs, etc.. I've had
some reservations on this, should I be worried about
the transfer case holding up to the extra torque? I'm
not sure if power goes into it at all in 2wd, and I
don't think the tranny will complain from the mods,
but I'd hate to spend a semester's worth of tuition on
the motor just to grenade part of the drivline.
===
Jon Smith -- NC
'95 CC SLT 4x4 (15.908@85.79)
318 auto, MP comp, JBA headers, 8.5mm MSD wires, 14x3 K&N, dual cat-back glasspacks, 180 degree thermo, spectre wire dividers
http://www4.ncsu.edu/~jdsmith4/truck.html
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:39 EDT