What sold me on the Jet chip is a guy that I hang out with '99 Black Rc R/T
got one and said he could feel the difference. Good enough for me, he
thinks it works so I will give it a try.
Chris Tesinsky
'99 Solar Yellow R/T CC
----- Original Message -----
From: Patrick Delgado <dadoctah@worldnet.att.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, April 06, 1999 2:06 PM
Subject: Re: DML: Jet stage 2 firms up the tranny? and shift kit ?
> Hmmmm. I've been holding out for the Mopar computer but the Jet is
starting to
> look better.
> Can anyone pump Mike Leach for info on the MP computer "flashing"?
> Dr. Pat
> ----------
> >From: Yellow RT <yellowrt@mediaone.net>
> >To: dakota-truck@buffnet.net
> >Subject: Re: DML: Jet stage 2 firms up the tranny? and shift kit ?
> >Date: Tue, Apr 6, 1999, 10:29 PM
> >
>
> > Okay, I just talked to the guys at jet. I am getting a Stage II Jet
Chip
> > P/N 99923S with a thermostat P/N 10170. He said that it will firm up
the
> > shift by increasing line pressure. I told him that I heard that you
will
> > not obtain as hard of shifts without going with a shift kit, he said
that
> > you should wait and see what it will do with the Jet Chip, he seems to
think
> > it will be a sufficient kick in the pants. I will have my chip by
Friday, I
> > also ordered a MSD 6A controller and a SS Coil. The guys at MSD
suggested
> > the SS coil over the blaster 2 or 3 coils, but said that the Blaster
coils
> > will work fine. I am also getting a set of Yellow Taylor 8mm wires. Oh
> > yeah the guy at Jet said you will get 19-21 rear wheel horse from the
chip.
> > I hope this helps. Oh yeah, again, the Jet chip will cost me $205.
> >
> >
> > Chris Tesinsky
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:39 EDT