There is one 10mm nut to remove nearest passenger, and the two torx things
just leave alone. Remove the nut and then there is a clip at the front of
the air intake to remove, then just pull the air box up, you don't need to
remove the torx screws.
Chris Tesinsky
'99 Solar Yellow R/T CC
----- Original Message -----
From: Mike Williams <williams@kode.net>
To: <dakotart@egroups.com>; DML <dakota-truck@buffnet.net>
Sent: Wednesday, April 07, 1999 11:00 PM
Subject: DML: ? on air box removal
> After the all the troubles I had with the air cleaner I didn't have time
> to screw with removing the air box. I thought it would be real easy..
> like two bolts and it's out... I looked at it and the fastener under
> where the element sits looks like the end of a torx bit. I messed with
> it a little, but decided to give up and tackle it later. What the hell
> is that thing and how do I unfasten it?
>
> --
> Mike Williams -- VP Mid-Michigan Mopar Enthusiasts
> 99 Blk R/T CC
> Mark your calendars.. June, 6th our 2nd all Mopar Show see
> http://mid-mich-mopars.org
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:40 EDT