OK, I've got a few questions for anyone who is in the
know about fixing paint chips.
I've cleaned out the chips, wetsanded them down smooth
to bare metal, and primed them. I've laid down about
4 coats of spray (had to get Dupli-color brand, looks
like a perfect match). I'm going to resand to get
things perfectly smooth w/ the surroundings and
repaint again. Then on to the clearcoating.
Can anyone give some tips/hints/suggestions on doing
this? A butt-load of work for such a small chip!!!
And in the words of Mr. T... " I pity tha foo who
scratches my truck" :)
===
Jon Smith -- Raleigh, NC
'95 CC SLT 4x4 318 auto (15.653@89.12)
MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank pulley, Hayden 16" elec. fan
http://come.to/killbilly
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:22 EDT