In a message dated 6/17/99 10:10:49 AM Pacific Daylight Time,
ashort@flash.net writes:
<< I wonder about the intake itself though, It gets super hot because it
gets hit from underneath with engine oil unless the lifter valley has a
tray seperating the 2. >>
On the bottom of the stock manifold, there is a sheetmatal plate bolted on.
If you weld a heat shield to that plate you can help cool the manifold down.
Or, get an MPI single plane manifold.
Brad
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:26 EDT