At 10:07 AM 6/23/99 +0000, you wrote:
>
> Rekker21@aol.com wrote:
>
>> what Ive done to my Intake manifold
>>
>> Magnum Manifolding
>>...The other concern centers on the lifters. They're real heavy
>> and overcome the strength of the lifter bore casting at high RPM. Spinning
>> the Magnum to 5400 RPM is borderline, 5800 RPM too much, and above 6000 RPM
>> can be the kiss of death...
>> Mopar Muscle--Inductive Reasoning July 1997
>> Eric
Would these rpm figures apply if the MP R/T Magnum cam, lifter, springs and
retainers are installed? If not, any idea what the max. figure would be?
Bob
Burlington, Ontario
'97 CC Sport, 5.2L, 3.55, auto., 4x2, flame red
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:28 EDT