Hrrrrmm... I hope they are different then, I was
thinking that they were the same b/c I was going with
a set of 360 heads and everyone I talked to said they
were the same....
--- GS- <GSWillhite@ualr.edu> wrote:
> Your right Rich, 360 heads are different from the
> 318.
> The 360 is intake valves are also larger than the
> exhaust
> valves on the same head. I think they call it swirl
> port or
> something. This would be a good upgrade for a 318.
>
> GS -
>
> >
> > I don't think the heads are the same. The valves
> are larger in the 360 than
> > the 318. Is this not true?
> > Rich - Ashburn, VA
> >
> > -----Original Message-----
> > From: Jon Smith [mailto:jdsmith4@yahoo.com]
> > Sent: Wednesday, June 23, 1999 10:44 AM
> > To: dakota-truck@buffnet.net
> > Subject: Re: DML: 318 vs. 360 TB
> >
> >
> > Gordon, they are the same, as are the heads.
> >
> > --- Gordon Adams <rtgordon@hotmail.com> wrote:
> > > Does anyone know if there is any difference in
> bore
> > > size of the stock 360
> > > throttle body and the stock 318 ?? (ie if you
> put a
> > > stock 360 TB on a 318
> > > would there be any difference??)
> > >
> > > thanks
> > > gordon
> > >
>
===
Jon Smith -- Raleigh, NC
'95 CC SLT 4x4 318 auto (15.653@89.12)
MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank pulley, Hayden 16" elec. fan
http://come.to/killbilly
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:28 EDT