RE: More TBI stuff... Attn: F or B

From: Bernd D. Ratsch (bernd@texas.net)
Date: Sat Jun 26 1999 - 01:33:27 EDT


(And they wonder why they did this on the Carburetors....)

-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
Blbridges@aol.com
Sent: Friday, June 25, 1999 10:59 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: More TBI stuff... Attn: F or B

Popping in...
Frank probably already covered thisa, But... Frank put a milled and
radiused
top stage One on the bench with a round "side draw" style filter element
with
an enclosed housing next to a non-milled top TB. The milled top (no
airhorn)
TB out flowed the airhorned unit by about 5% as I remember... With a top
draw
air hat (KB style etc.) you'd see less of a difference. It looks kinda
trick
too!
Bruce



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:30 EDT