The only way to get a 14" Air Cleaner on a V6 Dak (97-Up) is to find an
offset base for the Air Cleaner. Also, the A/C Valve on the compressor is
standing in an upright position so you may not be able to do this.
Stick to the QuickD (or K&N Gen-II) systems.
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Kevin
Hoegen
Sent: Monday, July 05, 1999 10:58 AM
To: DML post
Subject: DML: 14" diameter air cleaner to replace stock on 99 Dak V6
If anyone has done this modification on a similar Dak I'd like your input.
I'm basing my upgrade on the FABM setup discussed on the DML modification
page.
Even though I have a V6, I was thinkin of puttin the 14" instead of the 10"
air cleaner. I have little to know experience doing modifications.
Just wanted feedback from those who may have done it themselves to see if
its worth the trouble to try and put a 14" in.....seein that I dont know
what the hell im doin to start :-)
My Dak: 99 Dak CC V6 Sport w/AC
Thanks
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:51 EDT