Summit or Jegs are the cheapest places to get MSD and most other parts for
that matter. It does not matter whether you have a 4X4 or not. Though some
of the MSD units are made to withstand higher vibrations.
Jason
>does it matter if the truck is a 4x2 or a 4x4..
>i have picked out to use the following
>
> msd 6 ignition - msg6200
> blaster ss coil - pn8207
>
>where can i get the blaster ss coil ? i check summit racing for the msg
>ignition, but if u know a place where i can get cheaper, please let me
>know.....
>
>
>------
>Eric Giblock
>shortdogg@ncweb.com
>http://www.ncweb.com/~shortdogg
>----- Original Message -----
>From: <GrnDak4x4@aol.com>
>To: <dakota-truck@buffnet.net>
>Sent: Tuesday, July 06, 1999 12:51 PM
>Subject: Re: DML: Re: MSD stuff...
>
>
>> On my 3.9L , as far as ignitions mods I have are:
>> MSD 6-Offroad Ignition Box, PN#6470
>> MSD Universal wiring harness, PN#8873
>> MSD 8.5MM Super Conductor wires, PN#32189
>> Champion Truck Plugs, gapped at .050
>> Accel Super Coil, PN#140021
>> Borg Warner Select Brass Cap and Rotor
>>
>> Hope this helps.
>> Kyle
>> 93 Dakota 4x4 V6
>>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:52 EDT