Does anyone on the DML know where I can get aluminium tube, and where I can
get it mandrel bent. Also, what is a good size K&N cone filter for the 318?
>From: "Ashton, Rick" <RGASHTON@nettally.com>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck@buffnet.net
>Subject: Re: DML: RE: mods anybody?
>Date: Sun, 11 Jul 1999 23:08:55 -0400
>
>can you get that stuff at home depot or lows or somthing because i don't
>know
>where to get that ABS and plastic sleeves.
>
>Dester243@aol.com wrote:
>
> > I'd go with the 3 inch pipe. you can get a 3" to 3" plastic sleeve
>connector
> > for about 6 bucks (i think) and then bend it in all the places you want
>it
> > to come out and it'll goto the filter. The 6" K&N should have a round
> > opening with a ring clamp on the end. that's how mine is.... and i
>just put
> > that over the 3" pipe and clamped it. REMEMBER to get brackets to
>support
> > the housing. My piping is polished alumium which doesn't heat up badly
>due
> > to it's metalic characteristics, and it's also light.
> > ABS? are you trying to say PVC? or maybe i'm not thinking right coz
>i'm sick
> > -Dester
> >
> > > i'm starting to make my homemade k&n air filter and am wondering if i
> > should
> > > get a 3"
> > > pvc or a 2".
> > > any suggestions on how to complete this work of art? (like how to
>conect
> > > the filter
> > > to the pipe).
> > >
> > > garrett
> > > 3.9 V6
>
>
>
_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:56 EDT