At 04:25 PM 7/30/99 EDT, you wrote:
>How much does the cam and lifters cost?
>Josh
Since I get jobber's price at the parts dept. of a Dodge dealer
in Ontario, I bought the MP cam/lifter package (PN5249549) in Ontario.
I'd suggest that you try Koller Dodge's site and see what they're
charging (probably as good a price as anywhere in the U.S.).
If you go this route, MP also recommends that you install the MP
valve springs (PN5249464) and MP retainers (PN4452032). With an MP
computer (I use a '96 computer in my '97) which removes the speed limiter
and ups the rev limiter) to about 6300 rpm, this set-up safely raises
the redline to about 6200 rpms and moves peak horsepower and peak
torque up about 500 rpms.
Bob
Burlington, Ontario
'97 CC Sport, 5.2L, 3.55, auto., 4x2, flame red
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:29 EDT